That new faucet has been sitting in its box on the garage floor since last March, and honestly, nobody blames you. Coopers Plumbing handles plumbing fixture installation in Asheville, NC, and nearby areas, so you don't spend a Saturday on your back under a sink wrestling with a shutoff valve that hasn't budged in decades. We handle the surprises that come with older homes, and there are usually a few.
Coopers Plumbing brings fixture installation to homeowners in Asheville, NC, and the surrounding region as a family-owned, locally run company that has worked in the area since 1999. Holding a P-1 Residential and Commercial Master License, we install and replace faucets, sinks, toilets, and shower and tub fixtures, upgrade outdated hardware, and make sure every connection is done right.
Your old toilet rocks a little when you sit down, or there's a stain on the floor tile you keep meaning to look at, or you've had enough of a fixture that came with the house three owners ago. Either way, the plan is straightforward: out with the old, in with the new.
Then the actual conditions show up. Closet bolts rusted into the flange snap off instead of loosening. The flange itself sits below the finished floor because somebody tiled over the original without adjusting it, which is why the toilet rocked in the first place. The subfloor around the base has softened because a wax ring failed years ago and has been leaking slowly ever since. Rough-in distance from the wall in an older home sometimes doesn't match what modern fixtures expect, and the shutoff valve behind it hasn't been turned in two decades.
Working through that in order is the job. We pull the old fixture, check the flange height and condition, and repair or shim it so the new toilet sits level on solid footing. A rotten subfloor is addressed rather than covered up, because setting a new toilet on soft wood restarts the clock. A fresh wax ring, new bolts, a replaced supply line, and a working shutoff are standard. Then we set the bowl, level it, and run it through several flushes, watching the base for any weeping.
What you get is a toilet that sits solid, doesn't rock, doesn't leak, and won't need somebody back in eight months. New plumbing installation services done properly cost more up front than the cheapest quote and less than doing it twice.
Here's a rundown of the plumbing fixture work we take on.
We mainly work on homes, so the quirks of older Asheville houses are familiar territory for us. Rough-in spacing, drain placement, and venting in a 1940s bathroom rarely match the assumptions of modern fixtures. Catching those mismatches before the old fixture comes out keeps a one-day job from becoming a three-day one.
Shortcuts hide behind walls and under sinks, and they surface a year later as a slow leak nobody can find. Solid connections, correct materials, and working shutoff valves are standard on every job, not extras we quote separately. Experienced plumbers know which corners cause trouble later, which is exactly why we don't cut them.
Old hardware that's beyond rebuilding gets swapped for something that will last. Any plumbing fixture replacement includes checking the shutoffs and supply lines feeding it, since those are usually the same age as the fixture. Hauling away the old unit comes with the job.
Kitchen and bathroom faucets should be installed with new supply lines rather than reusing whatever brittle tubing was there before. Deck thickness, hole spacing, and sprayer connections all vary by model, so we check the fit before anything comes apart. A clean faucet installation leaves no drips at the connections and full travel on the handles.
Base cabinets, countertop cutouts, and drain height must all align before installing a new basin. Our sink installation work includes the trap, tailpiece, and supply connections, as well as setting and sealing the sink itself. Undermount and drop-in styles each bring their own considerations, and we'll tell you which suits your counter.
Flange condition, rough-in measurement, and floor soundness are checked before we set anything. Every toilet installation we do includes new bolts, a new wax ring, and a fresh supply line, since reusing those parts is how callbacks happen. Testing over multiple flushes confirms the seal before we leave.
Valve bodies, trim kits, and diverters need to match the plumbing already in the wall, and many plumbing companies find out the hard way mid-job. Checking compatibility ahead of time keeps us from opening the tile unnecessarily. Pressure-balancing valves are worth considering during any bath upgrade, especially in homes where flushing the toilet makes the shower cold.
Hard water around here is hard on cartridges and valve seats, which is why fixtures wear out faster than the manufacturer intended. Swapping out tired hardware improves flow and cuts the drips that quietly add up on a water bill. A licensed plumber can also tell you when a fixture is worth rebuilding rather than replacing.
Seeing rusty water, dealing with low water pressure, or repeatedly fixing the same leak can be signs that older pipes are wearing out. Our repiping services include whole-home repiping, galvanized pipe replacement, polybutylene pipe replacement, and updates for aging plumbing systems.
When your hot water becomes unreliable, runs out too soon, or disappears altogether, we can help determine what your system needs. Our water heater services cover installation, repair, replacement, maintenance, emergency repairs, and help with choosing the right setup for your home.
A sewer line problem can show itself as backups, recurring clogs, or issues that keep returning after a temporary fix. Our sewer line services include repairs, replacements, maintenance, and diagnosis of damaged underground piping.
Hidden sewer problems are a lot easier to understand when we can actually see what's happening inside the line. Our sewer camera inspections can reveal blockages, deteriorated pipes, failing cast iron, root intrusion, and the location of underground sewer piping.
If a sink, tub, or shower is draining more slowly than usual, there may be more buildup in the line than you can see from the surface. Our drain cleaning service tackles stubborn clogs, recurring blockages, slow drains, and routine maintenance for kitchen and bathroom plumbing.
Small plumbing issues have a habit of becoming bigger ones when they're ignored for too long. Our plumbing repairs include leak repair, pipe repair, fixture repair, water pressure troubleshooting, and help with worn or damaged plumbing components around the house.
When water is spreading fast or a major plumbing problem shows up after hours, getting help quickly matters. Our emergency plumbing service is available 24/7 for burst pipes, serious leaks, sewer and drain issues, water heater emergencies, and shutoff assistance.
We keep fixture projects easy to understand by combining real plumbing experience with the personal service of a local family business.
More than two decades of installations and a P-1 Residential and Commercial Master License mean we've already dealt with whatever's hiding behind your vanity.
Local ownership has held on here while corporate buyers consolidated plumbing contractors across the country, and that's why you'll see the same faces on repeat visits.
Quality shows up over time, which is the thinking behind the Rheem and Bradford White equipment we install and the materials we use everywhere else.
Our labor comes with a one-year warranty, and our plumbing company will gladly explain the manufacturer's coverage on whatever fixture you've chosen.
A faucet may look pretty simple sitting in the box, but the water connections and shutoff valves still need to be hooked up correctly. A professional plumbing fixture installation can help prevent small hidden leaks and catch worn connections that may need attention during the swap.
A straightforward faucet, sink, or toilet installation may only take a few hours when the existing plumbing is in good condition. Corroded connections, damaged valves, or plumbing that needs adjustment can add extra time to the job.
You don't have to replace every older fixture just because it has a few years on it. If you're seeing corrosion, repeated drips, poor performance, cracks, or worn connections, planning to replace a plumbing fixture early can help you avoid a more inconvenient failure later.
A plumbing fixture installation generally includes removing the old fixture when needed, connecting the new one to the existing plumbing, and checking the setup for proper operation and leaks. Depending on the project, that may include faucets, sinks, toilets, shower fixtures, or tub fixtures.
Make sure the new fixture fits the available space and works with the plumbing connections already in your home. A plumber can also check shutoff valves, supply lines, drains, and older connections to help you understand what you're getting into before installation starts.
FAQs reviewed by Chris Cooper, founder and owner of Coopers Plumbing, a licensed plumber in Asheville, NC.
If a toilet, sink, faucet, shower, or tub fixture is worn out or ready for replacement, we can handle the plumbing side of the project.
Business Name: Coopers Plumbing
Address: Asheville, NC, 28804
Phone: 828-254-0383
Business Hours:
Mon - Fri: 9:00 AM to 5:30 PM
Sat-Sun: Closed
24 Hour Emergency Service Available
As a Master Licensed contractor, we stand behind our workmanship with a 1-year labor warranty. Ask us about additional warranties.